About Us    /     Partners    /     Contact Us


Copyright © 2018 TALENT    Copyright © 2018 TALENT ALL RIGHT RESERVED  津ICP备15006844号-1

Office Site


高 度 洁 净  超 凡 表 现


Page view


Affiliate classification
I want to make an inquiry

This series of products including dehydrated anti-rust oil, anti rust oil replacement, free cleaning anti-rust oil, anti-rust function has been designed for the removal of water film, replacement,cleaning of hand sweat and clean free direct assembly function


FPC-630A seriesof dehydrated antirust oil

FPC-630B seriesanti rust oil replacement

FPC-630C series Clean Free Anti-rust Oil

Scope of Application

Applicable materials: steel, cast iron, copper, aluminum and other metal materials and galvanized chrome plating.

Applicable materials: all kinds of metal parts

Dehydrated anti-rust oil is suitable in the processing of a large variety of metal parts

Dehydrated anti-rustprocessingis suitable for various kinds ofmetal parts,and eliminates fingerprint marks andhand sweatcorrosion

Wide scope of application. Can be used to extract oil directly off mechanical products, auto parts, hardware tools etc


Low viscosity;

Excellentrust proof function,with the antirust protection period for a work piece from 3months ~1 years

Ability to expertly remove metal surface water film whilst forming a layer of rust preventing oil film on the metal surface after dehydration. Protect metal from corrosion

Canquicklyform a thin and evenly applied protective filmon the metal surface.

Oil is directly removed meaning work piece can go directly to assembly

Includes a new composite inhibitor and further enhanced anti-rust performance

Prevents corrosion causing fingerprints and eliminates hand sweat on the metal surface

Method of Use

  1. Before using the product for the first time, the water needs to be replaced and an anti-rust test conducted to determine the optimal processing parameters
  2. Begin metal work piece immersion oil processing. Apply a continuous swing of 0.5-2.0 minutes to ensure cleanliness in groves and bind holes. Shake work piece.
  3. A thin, evenly applied anti-rust coat is formed devoid of bubbles, oil stains etc.
  1. Ensure work piece is clear of grease, moisture, sweat and dirt
  2. Depending on technological requirements dip coating, brushing and spraying methods can all be used
  3. According to the conditions of storage and transportation and anti rust work piece itself, gas phase anti rust paper and anti rust package can be used for long-term rust resistance

Engineers Advise

1. Keep far away from fire

2. Do not mix with other brands anti rust products

  1. The processed work piece should be properly kept to ensure the integrity of the oil film
  2. In order to avoid oil deterioration, the bottom of the tank should be dried in order to remove collections of water droplets. To remove this undesirable water the oil tank should be designed into a cone shape with a stop valve placed at the bottom in order to regularly remove moisture. A metal mesh device should be be placed 100mm form the groove bottom

 During the process, avoid oil in the water mixing with a foreign substance


  1. This product should be stored in a dry, cool, ventilated warehouse and kept away from fire and heat sources. To avoid weather damage. product has a suggested storage temperature of 5~35 DEG C
  2. Under normal storage conditions, the product shelf life is two years


FPC-630A Series




16kg;    160kg

15kg;  150kg

Corresponding parameter set not found, please add it in property template of background
Key words
Previous article
Next article